THE LAB / EXPERIMENT 01 · MIXING
One performance.
Three different spaces.
Same musicians, same notes, same 30 seconds. Hear how changing a mix can make a band feel crowded, comfortable or larger than the space between your speakers.
Width is one part of the picture. Depth and perceived distance can change independently.
01 / LISTEN & COMPARE
Switch mixes. Keep your place.
Before you listen: Pick a mix and press Play. Switching mixes keeps you near the same part of the song, but may pause briefly. Want to compare your own rough mix with a finished version? Use Replace this recording beside each mix to choose WAV or FLAC files from your device. Replace examples (optional) can also load a set of files named for the mixes. Your files stay on your device, and local playback may still pause when switching.
Choose a mix and press Play to start. You can also compare your own versions of a song, like a rough mix and a finished mix. Use Replace this recording beside each mix to choose WAV or FLAC files from your device. Nothing is uploaded.
Select Play to prepare an online recording.
READY FOR A BLIND CHALLENGE?
Try the ABX Lab
Train your ears on mixing differences, then try randomized A/B/X listening and compare your results for fun.
Open the ABX Lab →03 / BEHIND THE MIX
What actually changed?
01 / Extreme Narrow1% stereo width
We kept the individual stems but brought all 14 tracks to within 1.5% of centre and reduced each stereo-width control to 1%. The same performances and basic level balance remain; the result is almost mono, although delivered in a stereo WAV.
Bringing all the instruments toward the centre can do more than shrink the stereo image. Sounds that overlap or partly cancel can also change the tone, making some parts harder to pick out (masking). Narrow mixes are a valid creative choice; this example deliberately exaggerates the effect.
02 / Conventional ReferencePreserved source character
The supplied processed-dry stems already contained intentional choices. The shaker's accented lateral drift was baked into the stem, and the backing vocals mostly reinforced the lead. We kept this printed character, set a basic balance and added the three extra stems without our theatrical automation.
This is not the fully mixed commercial master, nor raw microphones. The term reference means a straightforward assembly of these specific processed-dry stems.
03 / Creative / PolishedPlacement, EQ, depth and motion
The kick's low-mid boom was reduced and its attack emphasized. Rimshots and overheads gained presence and air. The lead-vocal level follows the arrangement; backing voices were moved into a more independent, distant presentation, sacrificing some of their original doubling effect.
The left rhythm guitar moves out and in with selected strum accents. The shaker's existing movement was exaggerated through EQ, level and spatial reflections. The tambourine moves centre → hard right → centre on alternate accented hits. A newly active strummed guitar was moved forward at about 22% right with a presence lift around 2.45 kHz.
Near the ending, we turned up the two synthesizers and made them bounce in opposite directions. Their levels alternate across about 10 dB, their positions swing roughly 30% left and right, and the swirling chorus/phaser effect speeds up from 1.7 to 4.2 cycles per second. The effect takes inspiration from a rotating speaker, but it is not a model of a real rotary cabinet.
Same song. Not the same mix.
All three examples use the same 14 processed-dry stems from Let The Light In, song 0:40–1:10. The finished files are 30 seconds, stereo 24-bit / 44.1 kHz. We matched their average perceived loudness to −20 LUFS (a way to estimate how loud a whole recording seems) using one fixed volume adjustment per file. We did not add mastering compression, limiting, EQ or widening to the final comparisons.
Why headphones?
Headphones may make some spatial cues, especially apparent front-to-back depth, easier to identify. Stereo speakers remain valid, but the room and speaker arrangement can change the sense of depth and centre placement.
For the reasoning behind the measurements and listening observations, read Behind the Experiments. The Lab stays focused on hearing the examples.
Which changes do you hear, and which ones do you actually prefer?