THE SOUND QUESTION · LEARNING CENTRE
Understand the numbers.
Hear the difference.
Start with how sound works, then learn to read speaker, amplifier and recording measurements. The lessons are written for curious listeners, not people who already speak engineering.
Open a lesson and switch between graph examples. For volts, amps, ohms and watts, see Ohm’s law for audio.
START HERE · LESSON 01
What are frequency, dB and distortion?
Before decoding any audio specification, learn the three ideas behind pitch, measured level and changes to a recorded signal. Includes the human hearing range, overlapping musical frequencies, a fictional speaker graph and a distortion illustration.
NEW · AUDIOPHILE DECODER / FIRST EDITION
What do people mean by “warm,” “punchy” or “holographic”?
A listening vocabulary for normal people who do not own a laboratory. Explore 32 subjective sound descriptions, hear them through everyday examples, and see how the recording, speakers, room or amplifier might be involved. Definitions first; proof and listening tests later.
01 / LOUDSPEAKERS
Why do speakers sound different?
Start with the sound you recognize, then use the graphs to explore what's happening.
Frequency response
Learn to read the rise and fall of a speaker's response graph and tell tonal preference from a serious irregularity.
Bass extension
A close look at bass roll-off, the difference between punch and deep extension, and how a spec can hide weak output.
Sensitivity
Sensitivity explains the volume difference you can get from the same test input, and why the printed number can mislead.
Speaker impedance and matching
See how a speaker's electrical demand changes with different notes, why “8 ohms” is only a rough label, and what your amplifier must handle.
Speaker drivers, materials and crossovers
See what the bass and treble drivers do, and how the speaker's filters divide the work between them.
Dispersion and off-axis response
Why the tone and stereo picture can change when you move across the couch or stand up.
02 / AMPLIFIERS
Where do the extra watts and distortion really matter?
Numbers on the box are only useful if you understand the conditions behind them.
Amplifier power
Power specifications, speaker load, headroom, and how to spot a misleading wattage claim.
Distortion (THD)
See distortion curves, understand clipping, and explore what audiophiles mean by second- and third-order harmonics.
Amplifier classes and devices
Compare Class A, AB and D, and distinguish vacuum tubes, BJTs and MOSFETs.
03 / HEADPHONES & IEMS
What fits your ears and your source?
Start with the cup and fit, then see how response and the electronics affect what reaches your ears.
Headphones and IEM types
See what distinguishes open, closed and semi-open cups, and how pads and tips sit.
Headphone frequency response and fit
Read a frequency range, then see how a pad gap and deliberate bass tuning show up on the graph.
Headphone sensitivity and impedance
Find out what your headphones need to play loud enough and stay clean on peaks.
Headphone output impedance
Compare a bass note and a midrange note to see why two headphone jacks can sound different.
04 / SOURCES & DACS
What happens before the amplifier?
Follow the route from vinyl, CDs, computers and streaming to the amplifier. Then explore voltage, DAC performance and digital formats.
Playback sources: vinyl, CD, DACs and sound cards
Compare analogue and digital playback paths, learn why vinyl needs a phono stage, and check which connections actually work.
Source levels and input sensitivity
Why a 2 V player and a 200 mV amplifier sensitivity rating do not automatically mean overload.
DAC noise and distortion specs
Understand background hiss, added distortion and output strength in a digital-to-analogue converter (DAC), plus what the figures cannot tell you about the sound.
Sample rates and audio bandwidth
Why 44.1, 48, 96 and 192 kHz do not automatically mean better sound, and what a sample rate really measures.
Bit depth and dynamic range
What 16-bit and 24-bit really change, why low-level rounding matters and how dither works.
Lossless vs lossy audio
What MP3, AAC, FLAC and WAV preserve, how bitrates affect storage, and when compression artifacts can matter.
05 / RECORDING & PRODUCTION
Where does a recording's sound begin?
Start before the amplifier: from microphones and recording rooms to direct instrument inputs and music generated inside a computer. Explore the recording chain from microphone and DI capture through resolution and the mix itself. Mastering follows next.
Microphones, DI and virtual instruments
Four ways a recording starts, why microphone placement changes what gets captured, and how the room becomes part of the sound.
Recording levels, bit depth and sample rate
Leave room for a loud note, see when turning a track down can save a take, and learn why some effects work at a higher rate.
Mixing, soundstage and spatial audio
Change a fictional four-track mix, see how delayed microphones comb-filter in mono, and distinguish stereo, binaural, QSound, 5.1 and Atmos.
Mastering, remastering and dynamic range
See how the same recording changes across masters, what to listen for across editions, and how level matching changes the demands on your amplifier.
MORE THAN GOOD VERSUS BAD
Different character isn't automatically a flaw.
Some listeners love bright, forward guitars. Others want a gentler balance. Some amplifier designs aim for minimal added sound; others deliberately introduce colour. These lessons distinguish accuracy, individual preference, and genuine performance limitations rather than declaring every non-flat line “bad.”
A baseline to compare against.
A measured difference you may enjoy.
Something genuinely worth investigating.
KEEP EXPLORING
More topics, as they're properly developed.
The playback-sources lesson connects formats and signal sources to your amplifier, while the new recording-chain lesson explores how sounds are captured or generated before mixing and mastering. Our new mixing chapter links production to the glossary; the detailed mastering and remastering chapter is next on the roadmap.
Lesson graphs use labelled illustrations and calculations for fictional equipment.