LESSON 14 · SOURCES & DACS

Playback sources: from the recording to your amplifier.

Vinyl, CDs, sound cards, USB DACs and streamers are often compared as though they do the same job. Some store music, some read it, some convert it, and some do several of those things at once.

The useful question is not “Which format sounds best?” It's “What happens to the signal at each step, and where could something change?”

Medium or file
Where the recording is stored: a groove, a CD, a file or a network service.
Transport / player
Reads the recording, retrieves data or handles playback.
Converter / phono stage
Turns digital audio into analogue, or makes a cartridge signal suitable for an amplifier.
Amplifier
Raises an analogue signal's available power for speakers. It may also contain a DAC or phono preamp.
START WITH THE SIGNAL PATH A DAC is a function, not necessarily a separate box.

A CD player's RCA sockets and a computer sound card's RCA sockets can both carry analogue signals that have already passed through a DAC.

INTERACTIVE 01 · THE PATH TO THE SPEAKERS

Same music, different routes.

Select a source. Follow each stage from where the recording lives to the amplifier. Labels describe the signal at that point, not a universal ranking of sound quality.

Vinyl record with a moving-magnet cartridge

The needle follows the record groove and makes a very small electrical signal. A phono preamp boosts that signal and corrects the special bass-and-treble balance used when records are cut (RIAA equalization).

Analogue Digital Processing / conversion
AnalogueVinyl groovePhysical movement
AnalogueStylus + MM cartridgeSmall electrical signal
ProcessingPhono stageGain + RIAA playback EQ
AnalogueAmplifier line inputLine-level analogue signal
OutputSpeakersAcoustic pressure
A turntable with a built-in phono stage can feed an ordinary line input. Without one, a typical moving-magnet cartridge needs a suitable MM phono input or an external phono preamplifier.

Conceptual paths: individual devices can combine blocks or insert extra processing. The amplifier's loudspeaker power stage is simplified. All stage diagrams are original illustrations, not product schematics.

THE EQUIPMENT · WHAT EACH COMPONENT ACTUALLY DOES

Six ways to get music into an amplifier.

Pay attention to whether the equipment delivers raw cartridge output, analogue line-level audio or digital data. The connector alone does not tell you the whole story.

01 / ANALOGUE MEDIUM

Vinyl record

The stylus follows a modulated groove. The cartridge generates a small signal, then the phono stage supplies gain and RIAA playback equalization.

Look for: MM/MC cartridge compatibility, cartridge loading, correct tracking, rumble, surface noise and phono-stage accuracy.

Why the phono input matters

A normal AUX/CD/TAPE input does not add the gain or playback equalization needed by a typical moving-magnet cartridge. Some turntables have a built-in phono stage with a LINE/PHONO switch. Make sure you don't apply phono equalization twice.

02 / DIGITAL MEDIUM

CD player or transport

An audio CD stores two channels of digital sound as 16-bit, 44.1 kHz PCM, meaning 44,100 numbered sound readings per second for each channel. A complete CD player converts those numbers into an electrical audio signal through a digital-to-analogue converter (DAC), ready for its RCA outputs. A CD transport sends the digital data to a separate DAC instead.

Look for: whether the outputs are optical/coaxial digital, analogue RCA, or both; mechanical reliability; and the actual DAC/output measurements.

Can an external DAC improve a CD player?

Only if the connection and implementation solve a measurable or audible limitation. A functioning CD player with clean analogue output has already converted the data; adding another DAC is not automatically an upgrade.

03 / COMPUTER AUDIO

Internal sound card

Your player opens the music file, and the computer may combine it with other sounds or change its sample rate. The sound card's digital-to-analogue converter (DAC) then turns that digital information into the electrical audio signal sent to your receiver or powered speakers.

Look for: analogue output voltage, noise, THD+N, driver/OS settings, clocking and the presence of unwanted DSP.

Does a sound card equal a cheap DAC?

No. A sound card is an audio interface that includes one or more DAC functions. A card with excellent analogue measurements can perform just as transparently as an external DAC. Installation, noise coupling and connection needs vary.

04 / EXTERNAL CONVERSION

USB DAC

A computer or compatible device sends digital audio over USB. The DAC converts it into analogue audio. Some units also include a headphone amplifier, volume control or ADC.

Look for: supported host/input formats, real output performance, RCA versus balanced voltage, output impedance and controls.

What does 32-bit / 768 kHz actually tell us?

It mostly describes an accepted input format, not the noise floor or sound quality of the analogue output. Bit depth and sample rate are meaningful concepts, but large advertised numbers are not a listening verdict.

05 / NETWORK PLAYBACK

Network streamer

A streamer receives music over a network, buffers or decodes it, and outputs either digital audio or analogue audio via an internal DAC.

Look for: local-file support, music-service limitations, audio-format support, app reliability, analogue-output measurements and usable connectivity.

Wi-Fi, Ethernet or Bluetooth?

Wi-Fi/Ethernet can carry lossless digital audio streams. Bluetooth audio often involves lossy codecs, but the exact result depends on the devices and codec. The connection method alone does not tell you whether two releases use the same master.

06 / OTHER ANALOGUE SOURCES

Cassette, reel-to-reel and tuner

These generally supply analogue line-level output after their own playback circuitry. Tape decks apply suitable playback equalization and gain internally.

Look for: tape speed, alignment, head condition, hiss, wow/flutter, noise reduction and source condition.

Are older sources automatically lower fidelity?

No universal verdict follows from age alone. Mechanical and analogue noise limitations are real, but maintenance, mastering and recording quality matter enormously, and a listener may prefer a particular presentation.

ACCURACY · COLOUR · PERSONAL PREFERENCE

Where could a source actually change the sound?

Changing the box or medium does not guarantee a change at your ears. Look for an identifiable mechanism and ask whether the magnitude is meaningful.

Potentially measurable changes

Vinyl: surface noise, wow/flutter, groove/tracing distortion, cartridge frequency response, channel separation and phono EQ error.

Digital hardware: DAC noise, distortion, filtering, output level, and sometimes output-impedance/load interactions.

Computer playback: resampling, system mixing, replay gain, clipping and intentionally enabled DSP.

Recorded programme: different mastering, level or dynamic-range treatment can overwhelm the small differences between competent playback devices.

For detailed measurements and listening implications, continue with DAC specifications, source levels, lossy versus lossless and subjective listening terminology.

INTERACTIVE 02 · VINYL PLAYBACK EQ

Why a record cartridge needs a phono stage.

During standard RIAA disc mastering, low frequencies are reduced and high frequencies boosted relative to a reference. Playback applies the complementary frequency shaping to restore the intended balance.

The orange curve shows the theoretical RIAA playback stage response relative to 1 kHz. The blue line shows a perfectly flat line-level stage for comparison.

This is not the overall response of a vinyl record, cartridge or turntable. The complete playback response also depends on the record, cartridge, loading, alignment and equalization accuracy.

Optional maths: the RIAA time constants

The idealized analogue playback response is proportional to (1 + s·318 µs) / [(1 + s·3180 µs)(1 + s·75 µs)], evaluated at s = j2πf and normalized to 0 dB at 1 kHz. These are the standard 3180, 318 and 75 µs time constants, corresponding to transition regions near 50, 500 and 2122 Hz.

Only the calculated ideal transfer function is plotted. A real phono stage will have finite tolerances and potentially additional low-frequency filtering.

Theoretical RIAA playback equalization versus flat line-level response Calculated RIAA playback gain relative to 1 kilohertz rises in the bass and falls in the treble. A flat line stage stays at zero decibels. The exact graph is drawn locally by JavaScript. Enable JavaScript to render the calculated RIAA curve.
Original calculated illustration: ideal RIAA playback-stage relative response from 20 Hz–20 kHz. Both overlays are independently switchable. No third-party graph data or proprietary figure has been copied.

CONNECTING YOUR EQUIPMENT

What kind of connection do you need?

Most sources are straightforward: connect an ordinary audio output to a matching input on your amplifier. The important exceptions are when a device sends a different kind of signal.

Three things worth checking

Ordinary audio: a CD player or streamer with analogue RCA outputs normally connects to an amplifier's AUX, CD or TAPE inputs. Avoid plugging a full-strength LINE output into a PHONO input.

Digital audio: an optical or USB digital output needs equipment that can turn digital music into an analogue signal, called a DAC. A matching plug isn't enough if the receiving device cannot understand that signal.

Turntables: a turntable may need a phono preamp to make its very quiet cartridge signal usable. Some turntables already include one; check whether it is on before choosing the amplifier input.

Start at a low volume after changing connections, and check the manuals when the labels aren't clear.

BUYING AND SETUP · WHAT MATTERS MOST

Which playback source should you actually use?

Start with connectivity

Check whether the amplifier takes RCA line, phono, USB audio, optical or coaxial digital. Buy the missing function, not an extra box for its own sake.

Compare matching measurements

Output level, frequency response with tolerance, noise, distortion, channel separation and load compatibility can be relevant. A high bit-depth figure alone proves little.

Keep the recording constant

If you compare CD, vinyl and streaming, check that they're using the same mastering and playback level. Different releases undermine a simple format-versus-format conclusion.

For your system, a PC with an X-Fi Titanium HD feeding an amplifier through its RCA outputs already contains the required DAC. You would need a separate converter only for a specific feature, connectivity or measurable performance reason, not because the converter is inside a computer.

SOURCE NOTES · READ FURTHER

What this lesson is based on.

The illustrations are original teaching diagrams and a calculated idealized equalization response. The references below document the underlying playback formats, signal handling and RIAA principles. They do not imply that we measured any particular commercial source.

Revised 11 November 2026 · Educational overview, not a product review. Exact input compatibility and fidelity depend on model, configuration and recording.