System Check

Can your amp handle the loudest hits at your seat? Find out what your speakers ask for and what an upgrade would buy you.

What are you working out?
Speakers and seat

Speaker power handling (optional, autofilled where verified)

Enter the speaker's own power rating, in watts (W) for one speaker. Don't put the amplifier's wattage here. “Continuous” means sustained input; “peak” is for short bursts; “nominal,” “maximum” and “recommended amplifier” may follow different rules. These labels are not interchangeable, so leave a field blank when the rating isn't clearly stated.

Choose a speaker preset to fill verified values. Unavailable limits remain blank and will be marked unverified.

Use sensitivity for one speaker. The calculator adds the pair’s contribution under Speakers contributing. If your sensitivity figure already includes both speakers at the stated input per speaker, choose +0 dB there.

Find my speaker specs

Entering an exact saved model automatically fills known specifications. Search only for fields used here: sensitivity and its 2.83 V/1 W basis, nominal impedance, and separately labelled power-handling values. Advanced fields can use measured minimum/maximum impedance and phase. A recommended amplifier range is not the speaker's damage limit. Manufacturer ratings and independent tests may use different conditions.

Enter the manufacturer and exact model to show targeted Google searches.

Independent measurements may help: Spinorama speaker index. Leave undocumented fields blank.

Listening goal

Start with 80 dB SPL as the average sound level at your seat. SPL means sound pressure level, measured in decibels. This is an editable example, not a prescribed listening level. Genelec discusses a 70–80 dB SPL range for room calibration. We initially allow another 15 dB for brief loud peaks, such as drum hits. Heavily compressed music may have a smaller gap; more dynamic music can have a larger one. Change either number to match the example you're checking. Technical explanation of peaks and averages

What does that level sound like?

For scale, CDC examples put normal conversation around 60 dB, movie theaters around 70–104 dB and rock concerts around 95–115 dB. Distance, the room, and the sound itself change these figures. In the lesson example, a brief drum hit reaches 102 dB SPL while the passage averages 87 dB SPL.

CDC everyday sound examples · Conversation and other reference levels
Amplifier ratings

Enter watts per channel. Use separate rows for different loads or test durations. Results highlight Your Speakers and show estimated 4 Ω, 6 Ω or 8 Ω alternatives as relevant. Enter continuous ratings for sustained output and short-burst ratings separately when known. A missing burst rating is not assumed to equal the clipping limit.

Find my amplifier specs

Choosing an exact saved amplifier model fills only the ratings and test conditions we have confirmed. When checking another amplifier, look for watts per channel at 8, 6 or 4 Ω and whether that figure is for continuous power or a brief burst. Also check the allowed distortion (THD or THD+N), the tested pitches and how many channels were working. Input sensitivity, gain and impedance are optional advanced details. Peak, dynamic and maximum watt ratings are not the same as continuous power.

Enter the manufacturer and exact model to show targeted Google searches.

Independent testing: Stereophile or Audioholics. Enter verified figures yourself and keep each test condition with its rating.

Fine-tune the estimate
Room and speaker load

Stereo pair assumes a single-speaker sensitivity figure. Choose +0 dB if the figure already includes the pair. Stereo summation varies with the recording, frequency and seat.

Keep room adjustment at 0 dB when using published in-room sensitivity to avoid counting the room contribution twice. A single-speaker in-room figure can still be used with the stereo pair setting.

Source and amplifier connection

For the input-sensitivity check, the first power rating must be the rating associated with that sensitivity. Use gain if you know it.

Published distortion readings

Enter one point per line from a single bench test. For 0.01%, enter 0.01. Do not enter a published THD limit as a curve point unless it really was measured at that power, load, frequency and input path. How to read distortion curves

Choose an amplifier preset to check whether independent distortion curves have been located. Ratings may autofill even when measured curve coordinates are unavailable.

Your estimate

Enter your speaker specs and listening goal to get started.

Headphone specifications

How the estimate works

Sensitivity tells us how much sound the speaker makes at a known input. The calculator estimates how much level you lose with distance, then works out the voltage and watts needed per channel. Room reflections, bass management, speaker compression, impedance phase and the duration of a peak can all change what your system delivers. Published bench ratings apply under their stated test conditions.

Amplifier headroom · Speaker sensitivity · Speaker impedance · Voltage, current and watts